Bruno Electra-Ride II Stair Lift
The Electra-ride II stair lift is an older model that is no longer available from Bruno. I've left this information online for anyone looking for information on it.
The Electra-Ride II Straight stair lift is manufactured by Bruno Independent Living Aids in Oconomowoc, Wisconsin.
The Electra Ride II features a rack and pinion drive system which is battery powered for years of quiet and reliable performance even in the event of a power failure. The padded seat will accommodate passengers up to 350lbs and is height adjustable with swing away arms for comfort and to ease transfers.
The Electra-Ride II can only be used on straight staircases without landings, curves or overruns but it's simple design and installation makes this stair lift an inexpensive option for people who do not require a lot of extra bells and whistles.
This stair lift comes standard in 16' and 20' track lengths and is normally cut to the needed length during installation but can be ordered in custom lengths up to 50'.
Although this is a basic stair lift, the Electra Ride II has all the normal safety features of more expensive stair lifts and can be upgraded for commercial installations.
Electra Ride II Straight Stair Lift Specifications
Rated Load: 350 lbs maximum
Power Source: 24 Volt DC comprised of 2ea 7amp/hr 12 volt sealed maintenance-free lead acid batteries. On/Off power switch to prevent battery drain over lengthy storage periods.
Charger: 110 Volt AC 1.5 Amp, 24 Volt DC 2 Amp continuous monitoring, full primary cut off.
Drive: 24 Volt DC motor, 2 pole rated 1.02 hp intermittent duty (2hr cont.) limited at current setting, no load speed 3800 rpm
Motor Controller: Custom 24 Volt DC PWM controller with acceleration ramping.
Braking: dynamic motor braking through the motor controller and self locking worm gear box.
Angle: Adjustable from 0 to 45 degrees standard, specials to 50 degrees.
Remote Control: Infra-red wireless CALL/SEND control. Momentary switching requires a user to continuously hold button to control unit.
Standard Control: 3 position, momentary rocker switch requiring user to continuously hold rocker switch to control unit, switch mounted under armrest. Optional keyed control.
Mounting: Either side of stairway, the unit is easily installed on either side of the staircase.
Speed: User adjustable with a maximum of 32 feet per minute, actual loaded top speed 28 feet per minute.
Track Length: 16 foot & 20 foot standard, Dealer to cut to fit the actual length of the stair, see application guide. Custom lengths to 50 foot.
Track Construction: 11 ga. mild steel roll formed to shape, gear rack welded to rail. Joint plates with (2) welded on side clamp blocks at each rail joint.
Footrest: Folding.
Seat Options:
Standard Seat: Padded, Folding & Swivels with stops at 45 degree intervals (+/- 90 degrees max.) Four position seat height adjustment. Arm rests are fixed to seat bottom, tilting up towards seat back for smaller profile when not in use. Arms swing out for easier transfers.
Large Seat with Fixed Arms (1540 Style): Padded, Folding & Swivels with stops at 45 degree intervals (+/- 90 degress max.) Four position seat height adjustment. Arm rests are fixed to seat bottom, tilting up towards seat back for smaller profile when not in use.
Commercial Package: Keyed rocker switch on chair, keyed remote call/send controls, and overspeed safety brake.